|
|
| | Standard Disposable Transfer Pipets Single squeeze draws up to 3.2mL Unbreakable all-in-one pipets eliminate the hazards of broken glass and exposure to infectious materials Put an end to matching rubber bulb with glass pipet. Since entire unit is disposable, these pipets prevent cross-contamination to samples and reduce airborne contamination to personnel. - Molded in one piece from see-through low-density polyethylene
- Inert to biological fluids and most acids
- Work well in hematology, urinalysis, chemistry, blood banking—anywhere there is a need for quick, safe transfer of fluids
- In four ready-to-use styles
- One squeeze draws from 2.0 to 3.3mL (depending on style used)
- Overall capacities from 4.6 to 7.5mL
- All deliver repeatable drop sizes
- Can be sealed and refrigerated for sample storage (seal with 02-678 Hemato-Seal* Tube Sealant
- With or without graduations
|
| Narrow-Stem Disposable Transfer Pipet Capillary tip design is ideal for blood banking and blood sedimentation applications Unbreakable all-in-one pipets eliminate the hazards of broken glass and exposure to infectious materials Put an end to matching rubber bulb with glass pipet. Since entire unit is disposable, these pipets prevent cross-contamination to samples and reduce airborne contamination to personnel. - Molded in one piece from see-through low-density polyethylene
- Inert to biological fluids and most acids
- Work well in hematology, urinalysis, chemistry, blood banking—anywhere there is a need for quick, safe transfer of fluids
- In four ready-to-use styles
- One squeeze draws from 2.0 to 3.3mL (depending on style used)
- Overall capacities from 4.6 to 7.5mL
- All deliver repeatable drop sizes
- Can be sealed and refrigerated for sample storage (seal with 02-678 Hemato-Seal* Tube Sealant
- Single squeeze draws up to 3.3mL
- Capacity: approximately 4.6mL
- Drop size depends on technique used
|
| Special-Purpose Padl-Pet Polyethylene Transfer Pipet For delivering drops onto slides or tiles Single-unit design features a built-in pipet bulb that eliminates need for plugging, packaging, autoclaving; prevents cross-contamination. - Made of shatterproof, nontoxic polyethylene
- Low-affinity surface reduces loss of cells and valuable proteins due to binding
- Can be frozen in liquid nitrogen, or heat sealed for storage
- Use paddle end to spread or mix reagents
- Nonsterile
Applications: For delivering drops onto slides or tiles |
| Nonsterile Graduated Polyethylene Transfer Pipets Graduation lines allow the accurate measurement of more than one volume - Made of shatterproof, nontoxic polyethylene
- Low-affinity surface reduces loss of cells and valuable proteins due to binding
- Can be frozen in liquid nitrogen, or heat sealed for storage
| Length | Capacity (mL) | Grads. (mL) | Bulb Draw (mL) | Drops/mL | Standard Bulb | 4.5 in. (11.6cm) | 1.5 | 0.10 to 0.3 | 0.8 | 21 | |
5.5 in. (14.0cm) | 1 | 0.25 to 1 | 2.2 | 25 | |
Blood Bank, Nonsterile | 6 in. (15.2cm) | 4.8 | 0.50 to 2 | 1.8 | 24 |
|
| |
|